ABK i-Cooking, Инструкция по эксплуатации

Страница: 14 / 24

EN 12 Use
3.4.4 Rest warmth indication
3.4 Cooking functions
After use of the cookingzone, the surface
will remain hot for some time. After
3.4.1 Start-stop
switching off the zone or the appliance, in
To start, push the on/off button. On the
the display the letter ”H“ lights up for some
display the ”0" positions will light up.
time. During this time no heat sensitive
To switch off the zone[s], you also push
products may be placed on the hot zone.
the on/off button. The display turns black
There is also a risk of burning or fire.
or shows the symbol ”H“ [rest warmth].
3.4.5 Booster function
3.4.2 Activating the cooking zone
The booster function generates an extra
Push the on/off button first. Now select
high power during maximal 10 minutes,
the required zone and touch the according
for example to quickly boil water. The
position on the display. The control light
electronical powermanagement regulates
next to the zone lights up as well. Now
the maximum available power. If the
adjust the required power. To stop, adjust
power boost is activated, this might
the power to ”0" In the display a ”0“or
influence the power of another linked
”H“[rest warmth] symbol appears.
induction zone. This happens when the
If nothing is touched, the display
requested power exceeds the maximum
automatically switches into the waiting-
available net power. On the display of the
position.
influenced induction zone, the ”9” will
start blinking, after a few seconds it will
3.4.3 Pan detection
first indicate and then supply the
The pan detection function is built in for
maximum available power.
safety. Without a pan the induction does
not work/ If there is not suitable or no pan
at all, it is impossible to generate or
change the power. In the display a ”U“
symbol appears. It disappears if a suitable
pan is placed. If a pan is removed from the
cooking zone, the current function will be
interrupted. The display shows the ”U“
symbol, untill the pan is replaced, after
which the cooking process is continued.
EN 13 Use
3.4.6 Individual zone timer 3.4.7 Timer
The timer enables you to simultaneously Additionally to the individual zone timer
set an individual timing on each of the 3 or you can also set a separate timer.
4 zones [from 0 to 99 minutes] Follow the above steps, but WITHOUT
selecting a cooking zone [skip steps 2 and
Example: 16 minutes on power 7. 3]
1. Switch on the appliance by pressing the
on/off symbol on the control panel.
3.4.8 Automatic cooking
2. Select the right zone by pressing the On each zone you can use the automatic
symbol on the control panel [”0” and cooking function, which means it starts
indicator on display is lit]. cooking with maximum power and
3. Adjust the power to 7 by using the slider automatically shifts back to the previously
or pressing it on the display. set power if the required temperature is
4. Now you can activate the timer by reached.
pressing on ”CL“. In the display you will Example: Automatic cooking, based on
see ”00”. The number 16 now must be power position 7.
entered in two steps [first ”6” then “1”]. 1. Switch on the appliance by pressing the
5. Move the slider until you see the on/off symbol on the control panel.
number ”6”. Confirm by pressing the timer 2. Select the right zone by pressing the
indicator. symbol on the control panel [”0” and
7. Move the slider until you see the indicator on display is lit].
number ”1” and confirm again by pressing 3. Adjust the power to 9 by using the slider
the timer indicator.”16”. or pressing it on the display
To switch off the zone timer, repeat from 4. Press the ”9” again, so that now also the
step 2 and set the time to “00“. ”A“ appears in the display.
If the zone timer reaches the set time, the 5. Set the requested power position, from
cooking zone will be switched off and “00“ ”9” to ”7”. In the display both the ”7” and
b l i n k s i n t h e d i s p l a y, a n d a the ”A” blink.
beeping alarm sounds. By pressing on the You can switch off the automatic cooking
blinking ”00” the alarm is switched off. function by first selecting the zone where
the ”7” and the ”A“ blink. Then choose
another power position by using the slider
on the control panel.