Abit WB6, Руководство пользователя, Страница: 47 / 118

BIOS Setup 3-15
User's Manual
feature. The default setting is Enabled .
CPU Level 2 Cache:
This item is used to enable or to disable the CPU level 2 cache. When the external cache is
e nable , it will speed up memory access, and the system works faster. The default setting is
Enabled .
CPU L2 Cache ECC Checking:
This item is used to enable or to disable the CPU level 2 cache ECC checking function. The
default setting is Enabled .
Processor Number Feature:
This feature can let the program read the data inside your processor. This feature only works
with Intel
®
Pentium
®
III processors. When you install a Pentium
®
III processor into your
motherboard, and when your system boots-up then this item will show up in BIOS.
Two items will be available: Enabled and Disabled. When you choose Enabled, the specific
program can read your processor's serial number. When you choose Disabled it will not
allow the program to read your processor's serial number. The default setting is Disabled.
Quick Power On Self Test:
After the computer has been powered on, the BIOS of the motherboard will run a series of
tests in order to check the system and its peripherals. If the Quick Power on Self-Test feature
is enable, the BIOS will simplify the test procedures in order to speed up the boot process.
The default setting is Enabled .
First Boot Device:
When the computer boots up, the BIOS attempts to load the operating system from the
devices in the sequence selected in these items: floppy disk drive A, LS/ZIP devices, hard
drive C, SCSI hard disk drive or CD-ROM. There are ten options for the boot sequence that
you can choose (The default setting is Floppy .):
Floppy
,
LS/ZIP
,
HDD-0
,
SCSI
,
CDROM
,
HDD-1
,
HDD-2
,
HDD-3
,
LAN
,
Disabled.