Abit WB6 Скачать руководство пользователя страница 100

Страница: 100 / 118

G-2 Appendix

WB6

2. This Windows

95/98 driver does not support CD-ROM Changers. If you have an ATAPI

CD-ROM Changer installed in your system, please do not install this driver!

3. We have found that the Windows

95 OSR2/Windows

98 version fails to load the driver

on some systems using the Bus Master chipset after you install and restart the system. The

following step could solve this problem if it happens:

(1) Go to My Computer and double click Control Panel.

(2) Double click System then go to Device Manger and View Devices by Type.

(3) Go to hard disk controllers.

(4) Double click PCI Bus Master IDE Controller (Ultra DMA supported). (There should

be a yellow mark besides this item)

(5) Click Resources and you should see a box near the bottom of the screen that says “Set

Configuration Manually”.

(6) Click on “Set Configuration Manually” and you will see a check next to “Use

automatic setting”.

(7) Uncheck the box and when the system asks you to reboot click “yes”.

(8) After the system restarts the yellow mark should be gone

4. De-Installation:

To uninstall XStore Pro from your system, run "Uninstall" from the HighPoint XStore Pro

program group. This uninstall utility will: deactivate CD Xpress, if CD Xpress is active,

remove the buffer space, and uninstall XStore Pro and CD Xpress from the system. After

uninstalling XStore Pro, the hard disk will return to its original status. We suggest users

reboot the system after finishing uninstalling.

5. The ATAPI LS-120 device will be recognized as a removable device in retail Windows

95(4.00.95) and OSR1 Windows 95(4.00.95 A) after the XStore Pro driver is installed.

6. This driver might lock on certain motherboards. Please check HighPoint Technology first

if you encounter problems.

For more detailed information, please check the read me file stored in the

XStore Pro

Program Group

. If you want to upgrade to a new version of the driver or want to know more

about XStore Pro products, please go to the HighPoint Technologies Inc’s company WEB

site, the URL is

http://www.highpoint-tech.com/

This CD-ROM (Or floppy diskette) has the HighPoint XStore Pro drivers. (Version 1.2) The

following procedure describes how to install the HighPoint XStore to your system. If you

Содержание WB6























































































































Результаты поиска

Содержание WB6

Отзывы:

Похожие инструкции для WB6

Бренды по названию

Популярные бренды

Abit WB6, Руководство пользователя

Результаты поиска

Содержание WB6

Отзывы:

Похожие инструкции для WB6

Бренды по названию

Популярные бренды