Abit SX7-533 Скачать руководство пользователя страница 46

Страница: 46 / 84

Chapter 3

SX7-533

3-22

Wake Up by LAN:

Two options are available: Enabled or Disabled. The default setting is

Disabled

. When set to

Enabled

any event affecting LAN card (through the PCI PME internal pin) will awaken a system that has powered
down.

Wake Up by Modem Ring:

Two options are available: Enabled or Disabled. The default setting is

Disabled

. When set to

Enabled

any event affecting the modem (external modem) ring will awaken a system that has powered down.

Wake Up by RTC Alarm:

Two options are available: Disabled or Enabled. The default setting is

Disabled

. When set to

Enabled

you can set the date, hour, minute and second alarm at which the RTC (real-time clock) alarm awakens
the system from Suspend mode. The enable items will appear white in color and disabled items will show
a blue green color.

RTC Alarm Date:

You can select the date from 01 ~ 31, or Every Day. The default setting is

Everyday

. This field is not

available to enter when the “

Resume by RTC Alarm

” field is

Disabled

RTC Alarm Hour:

You can select the hour from 00 ~ 23, which means the hour of 00 to hour of 24. This field is not
available to enter when the “

Resume by RTC Alarm

” field is set to

Disabled

RTC Alarm Minute:

You can select the minute from 00 ~ 59, which means the minute of 00 to minute of 60. This field is
not available to enter when the “

Resume by RTC Alarm

” field is set to

Disabled

RTC Alarm Second:

You can select the second from 00 ~ 59, which means the second of 00 to second of 60. This field is
not available to enter when the “

Resume by RTC Alarm

” field is set to

Disabled

Содержание SX7-533





















































































Результаты поиска

Содержание SX7-533

Отзывы:

Abit SX7-533, Руководство пользователя, Страница: 46 / 84

Результаты поиска

Содержание SX7-533

Отзывы: