Abit SX7-533, Руководство пользователя

Страница: 33 / 84

Introducing the BIOS
User’s Manual
3-9
Block Mode:
Two options are available: Auto
)
Off. The default setting is Off . Block mode is also called block
transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports block mode
(most new drives do), select
Auto for automatic detection of the optimal number of block read/writes per
sector the drive can support.
Fast Programmed I/O Modes:
Seven options are available: Auto
)
0
)
1
)
2
)
3
)
4
)
5. The default setting is Auto . The BIOS
can auto-detect the transfer mode of the IDE devices in order to set its data transfer rate. You can select
the PIO mode from Mode 0 to Mode 4 of the IDE devices in order to set its data transfer rate.
32 Bit Transfer Mode:
Two options are available: Auto
)
Off. The default setting is Off . Select Auto can enable 32 bit access to
maximize the IDE hard disk data transfer rate.
Video Type:
Four options are available: VGA/EGA
)
CGA 40x25
)
CGA 80x25
)
Mono. The default setting is
VGA/EGA . You can set your monitor display typr here.