Abit SG-71, Руководство пользователя

Страница: 64 / 114

Chapter 4
SG-71
4-14
IDE Primary Master PIO:
Six options are available: Auto Mode 0 Mode 1 Mode 2 Mode 3 Mode 4. The default
setting is Auto . The BIOS can auto-detect the transfer mode of the IDE devices in order to set its data
transfer rate (Default). You can select the PIO mode from 0 to 4 of the IDE devices in order to set its
data transfer rate. This field does not available to enter when the “
Internal PCI/IDE ” field is
Disabled or Secondary .
IDE Primary Slave PIO:
Six options are available: Auto Mode 0 Mode 1 Mode 2 Mode 3 Mode 4. The default
setting is Auto . The BIOS can auto-detect the transfer mode of the IDE devices in order to set its data
transfer rate (Default). You can select the PIO mode from 0 to 4 of the IDE devices in order to set its
data transfer rate. This field does not available to enter when the “
Internal PCI/IDE ” field is
Disabled or Secondary .
IDE Secondary Master PIO:
Six options are available: Auto Mode 0 Mode 1 Mode 2 Mode 3 Mode 4. The default
setting is Auto . The BIOS can auto-detect the transfer mode of the IDE devices in order to set its data
transfer rate (Default). You can select the PIO mode from 0 to 4 of the IDE devices in order to set its
data transfer rate. This field does not available to enter when the “
Internal PCI/IDE ” field is
Disabled or Primary .
IDE Secondary Slave PIO:
Six options are available: Auto Mode 0 Mode 1 Mode 2 Mode 3 Mode 4. The default
setting is Auto . The BIOS can auto-detect the transfer mode of the IDE devices in order to set its data
transfer rate (Default). You can select the PIO mode from 0 to 4 of the IDE devices in order to set its
data transfer rate. This field does not available to enter when the “
Internal PCI/IDE ” field is
Disabled or Primary .
Primary Master UltraDMA:
Two options are available: Disabled Auto. The default setting is Auto . Ultra DMA is a DMA data
transfer protocol that utilizes ATA commands and the ATA bus to allow DMA commands to transfer
data at a maximum burst rate of 133 MB/sec.
If you encounter the problem of using Ultra DMA devices, you can try to set this item to Disabled .
When you select Auto, the system automatically determines the optimal data transfer rate for each
IDE device (Default). This field does not available to enter when the “
Internal PCI/IDE ” field is
Disabled or Secondary .
Primary Slave UltraDMA:
Two options are available: Disabled Auto. The default setting is Auto . Ultra DMA is a DMA data
transfer protocol that utilizes ATA commands and the ATA bus to allow DMA commands to transfer
data at a maximum burst rate of 133 MB/sec.
If you encounter the problem of using Ultra DMA devices, you can try to set this item to Disabled .
When you select Auto, the system automatically determines the optimal data transfer rate for each
IDE device (Default). This field does not available to enter when the “
Internal PCI/IDE
” field is
Disabled or Secondary .
Secondary Master UltraDMA:
Two options are available: Disabled Auto. The default setting is Auto . Ultra DMA is a DMA data
transfer protocol that utilizes ATA commands and the ATA bus to allow DMA commands to transfer