Abit IT5E Series, Руководство пользователя, Страница: 57 / 98

Introduction of BIOS 3-23
Standby Mode:
When the setting selected for "Power Management" is "User Define",
you can define for this mode any delay from 1 minute to 1 hour. If no
power management event occurs during this time period, meaning the
computer is inactive during this period, the system will enter the
Standby power saving mode.
If this mode is disabled, the system will enter the next mode in the
sequence (Suspend mode).
Suspend Mode:
When the setting selected for "Power Management" is "User Define",
you can define for this mode any delay from 1 minute to 1 hour. If no
power management event occurs during this time period, meaning the
computer is inactive during this period, the system will enter the
Suspend power saving mode. The CPU stops working completely.
If this mode is disabled, the system will not enter the Suspend mode.
Wake-Up Events:
When system is in Doze or Standby power saving mode, it will check
for the wake-up events (IRQ4, 3, 8, 12) defined. When it detects an
activity of one of the IRQs defined, it exits the power saving mode
and returns to full operation mode (Normal).
Wake-up events are all operations or signals that cause the system to
recover normal operation.
Power Down & Resume Events:
When one of the power down and resume events (IRQ3-15) speficied
occurs, the count down made for entry in power saving mode goes
back to zero.
Since the computer will enter a power saving mode only after an
inactivity delay specified (time speficied for Doze, Standby and
Suspend modes) and after it has no activity, during this time period,
any event will cause the computer to re-count the time elapsed.
Resume events are operations or signals that cause the computer to
resume time counting.