manualshive.com logo in svg

Abit IT5 Series, Руководство пользователя

Поделиться
Скачать
Abit IT5 Series Скачать руководство пользователя страница 99

General Discussion about HDD Installation 

 

E-3 

Installing a hard disk: 

In the 

Standard CMOS Setup Menu

,   

♦

  Primary means the first connector on the mainboard, that is, 

connector IDE1 on our mainboard. 

♦

  Secondary means the second connector on the mainboard, that is, 

connector IDE2 on our mainboard. 

♦

  Two HDDs can be connected to the each connector: 

The first HDD is referred to as Master, 
The second HDD is referred to as Slave.

 

 

The Master or Slave status of the hard disk drive is set on the 
hard disk itself. Refer to the hard disk drive manual.

 

Installing one HDD : 

The red line on the connection cable must be lined up with pin 1 on the connector.

 

Be sure that your hard disk drive is set at Master. Actually, most hard 
disk drives are set at Master as a default, so you don

’

t need to adjust 

any setting. Just connect one end of the 40 pin cable on the drive 
connector, and the other end to connector IDE1 on the mainboard.

 

Installing one HDD + one CD-ROM drive:

 

The red line on the connection cable must be 

lined up with pin 1 on the connector.

 

Method 1:  Set the HDD at Master, and the CD-ROM drive at 

Slave. 
Connect one connector of the 40-pin cable to the hard 
disk, another one to the CD-ROM drive, and the other 
end to connector IDE1 on the mainboard. 

Method 2:  Set the HDD as Master and connect one end of the 

40-pin cable to the HDD, and the other end to connector 
IDE1 on the mainboard. 
You can ignore the setting of the CD-ROM drive, just 
connect one end of the 40-pin cable to the CD-ROM 
drive, and the other end to connector IDE2 on the 
mainboard. 
We recommend you use this kind of connection, which 
has no influence on HDD speed. 

Содержание IT5 Series















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды