manualshive.com logo in svg

Abit IT5 Series, Руководство пользователя

Поделиться
Скачать
Abit IT5 Series Скачать руководство пользователя страница 101

General Discussion about HDD Installation 

 

E-5 

Installing three HDDs: 

The red line on the connection cable must be lined up with pin 1 on the connector. 

Method 1:  Set the hard disk drive  used for boot up at Master, set 

the second drive at Slave. Connect one connector of the 
40-pin cable to the first drive, another connector to the 
second drive, and the other end of the cable to connector 
IDE1 on the mainboard. 
Set the other (the third) drive at Master, and connect one 
end of the 40-pin cable to the drive, and the other end to 
connector IDE2 on the mainboard. 

Method 2:  Set the hard disk drive used for boot up at Master, and 

connect one end of the 40-pin cable to the drive and the 
other end to connector IDE1 on the mainboard. Set 
another drive (the second drive) at Master and the third 
drive at Slave, connect one connector of the 40-pin cable 
to the second drive, another connector to the third drive, 
and the other end of the cable to connector IDE2 on the 
mainboard. 

Installing three HDDs + one CD-ROM drive: 

The red line on the connection cable must 

be lined up with pin 1 on the connector. 

Set the hard disk drive used for boot up at Master, set another HDD 
(the second) at Slave, connect one connector of the 40-pin cable to 
the first drive, another connector to the second drive, and the other 
end of the cable to connector IDE1 on the mainboard. 
Set the third hard disk drive at Master, set the CD-ROM drive at 
Slave, connect one connector of the 40-pin cable to the third HDD, 
another connector to the CD-ROM drive, and the other end of the 
cable to connector IDE2 on the mainboard. 

BIOS Setup: 

♦

 If all your HDDs are new, you can use the 

IDE HDD Auto 

Detection 

option in the CMOS to autodetect the parameters of all 

your drives. You don

’

t need to set any hard disk parameter

.

 

♦

 If one or several of your HDDs are old, and if you don

’

t know their 

parameters, and you want to reconfigure your drives, you can also 
use the 

IDE HDD Auto Detection

 option in the CMOS to 

autodetect the drives parameters

.

 

Содержание IT5 Series















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды