manualshive.com logo in svg

Abit IT5 Series, Руководство пользователя

Поделиться
Скачать
Abit IT5 Series Скачать руководство пользователя страница 100

Appendix E

 

 

E-4 

Installing two HDDs:

 

The red line on the connection cable must be lined up with pin 1 on the connector.

 

Method 1:  Set the hard disk drive used for boot up at Master, and 

the other drive at Slave. Connect one of the connectors of 
the 40-pin cable to the first drive, another connector to 
the second drive, and the other end of the cable to 
connector IDE1 on the mainboard. 

Method 2:  Set the hard disk drive  used for boot up at Master, 

connect one end of the 40-pin cable to the drive, and the 
other end to connector IDE1 on the mainboard. 
Set the other hard disk drive at Master, connect one end 
of the 40-pin cable to the drive, and the other end to 
connector IDE2 on the mainboard. 

Installing two HDDs + one CD-ROM drive:

 

The red line on the connection cable must be 

lined up with pin 1 on the connector.

 

Method 1:  Set the hard disk drive  used for boot up as Master, set 

the other HDD at Slave, connect one connector of the 
40-pin cable to the first drive, another connector to the 
second drive, and the other end of the cable to connector 
IDE1 on the mainboard. 
You can ignore the setting of the CD-ROM drive. 
Connect one end of the 40-pin cable to the drive, and the 
other end to connector IDE2 on the mainboard. 
We recommend you use this method, which has no 
influence on HDD speed. 

Method 2:  Set the hard disk drive  used for boot up at Master, 

connect one end of the 40-pin cable to the drive, and the 
other end to connector IDE1 on the mainboard. 
Set the other hard disk drive at Master, and be sure that 
the CD-ROM drive is set at Slave. Most of CD-ROM 
drives are set at Slave as a default, so you will normally 
not have to set the CD-ROM drive. After you have 
verified the settings, connect one connector of the 40-pin 
cable to the HDD, another connector to the CD-ROM 
drive, and the other end of the cable to connector IDE2 
on the mainboard. 

Содержание IT5 Series















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды