Abit IS7, Руководство пользователя

Страница: 65 / 110

BIOS Setup 3-11
Memory Hole At 15M-16M:
When set to [Enabled], the memory address space at 15M-16M will be reserved for ISA expansion cards
that specifically requires this setting. This makes the memory from 15MB and up unavailable to the
system. Leave this item to its default setting.
Delay Prior to Thermal:
This item selects the delay time before thermal activation.
AGP Aperture Size:
This option specifies the amount of system memory that can be used by the AGP device. The aperture is a
portion of the PCI memory address range dedicated for graphics memory address space.
Init Display First:
This item selects to initialize AGP or PCI Slot first when the system boots.
[AGP]:
When the system boots, it will first initialize AGP.
[PCI Slot]: When the system boots, it will first initialize PCI.
AGP Data Rate Capability:
This item selects the data transfer rate of AGP device. A higher rate delivers faster and better graphics to
your system. Make sure your graphics card supports the mode you select.
Game Accelerator: (For IS7-G and IS7 only)
This item selects the mode for Game Accelerator among the options of [Auto], [Turbo], [Street Racer],
and [F1].
NOTE: The option [Street Racer] and [F1] mode will stress the DDR memory critically; not every kind of
DDR memories could be stable with these two options. [Turbo] mode is okay for most of DDR memories.
Refresh Cycle Time:
This item determines the DRAM Refresh Cycle among [Auto], [Normal], [Enhanced], [Strengthened],
and [Aggressive].
Read Delay (tRD):
This item determines the timing of DRAM Read Delay.
Read delay Adjust(tRDA):
This item determines to adjust the timing of DRAM Read Delay.
Command Per Clock(CPC):
This item determines the address command timing according to the DRAM strobe clock.
On-Chip VGA: (For IS7-M only)
This option enables or disables the on-chip VGA controller.
On-Chip Frame Buffer Size: (For IS7-M only)
This option selects the size of on-chip frame buffer.
User’s Manual