Abit AB-BE6 Скачать руководство пользователя

Страница: 72 / 102

B-2 Appendix

BE6

XStore Pro in your system, otherwise it will cause system conflict when you install the

second bus master driver!

2. This Windows

95/98 driver does not support CD-ROM Changers. If you have an ATAPI

CD-ROM Changer installed in your system, please do not install this driver!

3. We have found that the Windows

95 OSR2/Windows

98 version would fail to load the

driver on some systems using the Bus Master chipset after you install and restart the

system. The following step could solve this problem if it happens:

(1) Go to My Computer and double click Control Panel.

(2) Double click System then go to Device Manger and View Devices by Type.

(3) Go to hard disk controllers.

(4) Double click PCI Bus Master IDE Controller (Ultra DMA supported). (There should

be a yellow mark besides this item)

(5) Click Resources and you should see a box near the bottom of the screen that says “Set

Configuration Manually”.

(6) Click on “Set Configuration Manually” and you will see a check next to “Use

automatic setting”.

(7) Uncheck the box and when the system asks you to reboot click “yes”.

(8) After the system restarts the yellow mark should be gone

4. De-Installation:

To uninstall XStore Pro from your system, run "Uninstall" from the HighPoint XStore Pro

program group. This uninstall utility will: deactivate CD Xpress, if CD Xpress is active,

remove the buffer space, and uninstall XStore Pro and CD Xpress from the system. After

uninstalling XStore Pro, the hard disk will return to its original status. We suggest users to

reboot the system after finishing uninstalling.

5. The ATAPI LS-120 device will be recognized as a removable device in retail Windows

95(4.00.95) and OSR1 Windows 95(4.00.95 A) after the XStore Pro driver is installed.

6. This driver might lock on certain motherboards. Please check HighPoint Technology first

if you encounter problems.

For more detailed information, please check the read me file stored in the XStore Pro

Program Group. If you want to upgrade to a new version of driver or want to know more

about XStore Pro products, please go to the HighPoint Technologies Inc’s company WEB

site, the URL is

http://www.highpoint-tech.com/

Содержание AB-BE6







































































































Результаты поиска

Содержание AB-BE6

Отзывы:

Похожие инструкции для AB-BE6

Бренды по названию

Популярные бренды

Abit AB-BE6, Руководство пользователя

Результаты поиска

Содержание AB-BE6

Отзывы:

Похожие инструкции для AB-BE6

Бренды по названию

Популярные бренды