P. 14
5.2 CHARGING
CHARGING VIA THE BATTERY PACK CHARGING SOCKET
1. Insert the battery charger cord (B) into Charging Socket
(C) on the battery pack
2. Plug the other end of the Power Cable into a standard
electrical wall outlet.
CHARGING VIA THE TILLER CHARGING SOCKET
1. Insert the battery charger cord (B) into Charging Socket
(C1) on the tiller upper charging socket.
2. Plug the other end of the Power Cable into a standard
electrical wall outlet.
LED INDICATOR
LED (Power) - RED LIGHT ON
LED (Charging) - ORANGE LIGHT ON
LED (Fully Charged) - GREEN LIGHT ON
C
(C1)
(d)
(e)
(a)
(b)
Charge the battery until the charging indicator turns green. For optimal performance, it is
recommended to charge the battery for 24 hours initially and for 8-12 hours after each use.
After the indicator turns green, unplug the battery charger from the scooter and the wall
outlet.
If the battery charger LED flashes green for more than 40 minutes, it indicates that abnormal
charging has occurred. You should check the following:
• Is the charger plug positioned correctly?
• Is the scooter turned off?
• If none of the above apply, please contact your local authorized dealer.
