![Abilica Trex 12 JBM-5255 Скачать руководство пользователя страница 63](http://html1.mh-extra.com/html/abilica/trex-12-jbm-5255/trex-12-jbm-5255_manual_3449156063.webp)
63
Profile window shows "W.T", and PULSE window shows "70" and blinks, press
SPEED
▲
or SPEED
▼
button to select your weight, press ENTER to confirm.
Press START to begin the test; at the same time, hold both of your hand onto pulse
sensor, PROFILE window shows "FAT" and blinks to indicate the test is processing.
After the test is done, a exercise suggested program show in PROFILE window, BMR
shown in TIME window, BMI show in PULSE window, and BODY FAT RATIO show
in CALORIES window.
User can press ENTER to start the suggested program, and use various settings as
in MANUAL mode; or press MODE to jump from BODY FAT mode to MANUAL
mode.
Press START / STOP button to begin exercise.
During the exercise, you can adjust speed of current segment by pressing the
SPEED
▲
or SPEED
▼
or
QUICK SPEED button.
During the exercise, you can adjust current incline by pressing the INCLINE
▲
or
INCLINE
▼
or quick incline button.
In setting mode, you don't need to set up each value, press ENTER to skip the value
you want to ignore, and press START at any time to start exercise.
NOTE:
Without setting user's gender, age, height, weight, this program cannot be operated.
If you don't set TIME, DISTANCE, and CALORIES, these values will be count up
from 0. If these values have been set, they will be count down to 0.
After user finishes suggested program, monitor beeps for alarm and machine stops,
you can press START to use the suggested program again.
Audio in:
Put the MP3 Player connector to AUDIO IN to broadcast the music.
Note:
Please reduce the volume of Audio-in player which might effect the heart rate
measurement.
USER PREFERENCE SETTING
This setting can only be operated when the machine is in static status.
Press MODE and INCLINE
▲
at the same time for 2 seconds to enter user
preference setting. During the setting, profile window shows "BZ", TIME window
shows "01" or "02", press SPEED
▲
or SPEED
▼
to select, then press ENTER to
confirm. ("01" means there's beep when a button is pressed and profile change a
column. "02" means there's only beep when a button is pressed )
PROGRAM PROFILE
SPEED Program profile (Unit = km/hour)
INCLINE Program profile (Unit = level)
Содержание Trex 12 JBM-5255
