![Abilica Trex 12 JBM-5255 Скачать руководство пользователя страница 55](http://html1.mh-extra.com/html/abilica/trex-12-jbm-5255/trex-12-jbm-5255_manual_3449156055.webp)
55
each increment or decrement of 1 Kcal. After finish setting the value, the
monitor will start to count down. While counting down to 0.0 monitor beeps to remind
you the target is achieved, and stop counting at the same time.
PULSE Display:
During the setting target heart rate mode, PULSE display glitters to inform you that
pressing SPEED
▲
or SPEED
▼
button to set the desired target heart rate from
60BPM to 220BPM. Once your heart rate is higher than your setting value, this
display glitters to inform you.
During exercise
During exercise, if user uses wireless chest belt or hand pulse sensor, the current
heart rate in beats per minute show on display. The range of pulse value is from 40 to
240 BPM.
PULSE MEASUREMENT SYSTEM
When your machine is JBM-4855, the treadmill pulse measurement function is
putting hands on the hand-pulse sensors for few seconds; monitor screen will show
your heart rate.
When your machine is JBM-5255, the motorize treadmill has two pulse measurement
functions. One is hand-pulse system. The other one is chest belt system. The hand-
pulse system is the first priority. If you wear chest belt and put your hand on the
hand-pulse sensor at the same time, the monitor will measure your heart rate from
the hand-pulse system and ignore the signal from chest belt. Once you move your
hand away from hand- pulse sensors, the monitor will measure your heart rate from
the chest belt automatically.
WARNING!
Heart rate monitor system may be inaccurate. Over exercise may result in serious
injury of death. If you feel faint stop exercising immediately.
Note:
The frequency of chest belt accepted by the monitor is 5 KHz. (chest belt is optional)
Receiver built in function:
If the monitor has heart-rate receiver built in inside, please wear the chest belt. The
first priority for the heart-rate measurement is hand-pulse system. When use chest-
belt, please do not hold your hand on the hand-pulse sensor. Otherwise, the heart-
rate measurement will come from hand-pulse.
SPEED Display:
During the exercise, showing the speed that treadmill currently provide. The speed
can be adjusted by pressing SPEED
▲
or SPEED
▼
button.
In the setting mode, it shows the minimum speed of this program. It can be adjusted
by pressing SPEED
▲
and SPEED
▼
buttons to set the speed of this program from
1.0 KPH to maximum 18.0 KPH.
INCLINE DISPLAY:
In the setting mode or exercise, it can be adjusted by pressing INCLINE
▲
and
INCLINE
▼
button to set up gradient of this program from LEVEL 0 to LEVEL 15.
Содержание Trex 12 JBM-5255
