Use GEWA Connect
28
To operate the product with an external switch
Make sure that an external switch is connected to the SW1 or SW2 jack on the
Multibox. By pushing the external switch you will:
1.
Start scanning.
2.
Select the highlighted area / item or vertical position.
If you use row scanning:
3.
Start the horizontal scanning.
4.
Select the highlighted item.
If you use point scanning:
3.
Close in on a more exact vertical position.
4.
Select the vertical position.
5.
Start the horizontal scanning.
6.
Select the horizontal position.
7.
Close in on a more exact horizontal position.
8.
Select the item at the line intersection.
If you do not push the external switch, the scanning will time out.
NOTE:
To navigate back to a previous page or view, use the “Back” option in
the “Longpress menu”. Refer to
NOTE:
GEWA Connect is always active in the background and scanning can
be activated by pushing the external switch regardless of which application is
in use.
To use the phone and text message function with an external switch
Refer to
and