Personalise GEWA Connect
18
To create an IR button
The product uses 3 types of IR signals:
l
Recorded IR signals from a remote control, for example a TV remote
control.
l
GEWA Link, used with Abilia receivers for example to turn a lamp on and
off.
l
GEWA 4096 coded signals, used with Abilia receivers for example to
open the front door.
1.
Follow steps 1-6 in
on the previous page. In step
4, enter a name for the button.
2.
“IR item” is selected by default. Tap the button "Save" to save the new
button. The new button shows in the list with the symbol "No command".
3.
Tap the symbol "No command". Select ”Record IR”, ”Use GEWA link” or
”Use GEWA 4096 code” and do the instruction steps.
l
For "Record IR" only: Point the TV remote control at the top of the
Multibox, at a distance of approximately 20 cm (A).
A
NOTE:
If the recording of the IR signal is not successful, decrease the
distance between the TV remote control and the Multibox and try
again.
4.
Tap the button "Options" and select "Switch to Normal mode".