Abilia 464000, Руководство пользователя, Страница: 6 / 36

6
2. Symbols used in these instructions for use
The following instructions are designed to ensure the personal safety of the user and
protect this device or any device connected to it from damage. These instructions use
symbols to draw the user's attention to the instructions at hand. The symbols act as safety
and warning signs. The symbols and their explanations are as follows:
If the instructions are not adhered to, the situation may lead to a death or
serious personal injury (in these instructions for use). ATTENTION - consult
accompanying documents (i.e. these instructions for use)
Means that the section contains important information for the user (in these
instructions for use).
Indicates the maximum use and storage temperature of the bed sensor.
When led next to this is blinking it indicates person is in bed (in the control
unit)
When led next to this is blinking it indicates product is in stand-by mode (in
the control unit).
Non-ionizing radiation (in these instructions for use, chapter
Electromagnetic conditions ).
Symbol of European Waste Electrical and Electronic Equipment Directive
(WEEE Directive) 2002/96/ EC on waste electrical and electronic
equipment (in these instructions for use and on bed sensor).
Indicates that the product is in compliance with the European directive
2002/95/EC on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (commonly referred to as the Restriction
of Hazardous Substances Directive or RoHS).
Indicates manufacturer’s name and address (in the control unit and bed
sensor).
Indicates positioning of battery cell. + is positive terminal and - is negative
terminal (in the control unit).
Indicates polarity of d.c. power connector (In the external power supply).
Indicates alternating current (in the external power supply).
Indicates direct current (in the external power supply).
Indicates that product meets safety requirements specified in IEC 61140 for
Class II equipment (In the external power supply).
Product is for indoor use only (in the external power supply).
Product is UL Demko certified (in the external power supply).
Product is China SJ/T 11363-2006 certified (in the external power supply).