Abicor Binzel SR/ABITIG 17, Руководство по эксплуатации

Страница: 13 / 36

EN - 5
Valve torch SR/ABITIG
®
4 Putting into operation
4 Putting into operation
4.1 Equipping the torch
Equip the torch neck according to one of the following figures:
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Switch off the power source and close off the gas supply.
• Pull the mains plug.
NOTE
• The system may only be put into operation by trained personnel.
CAUTION
Risk of injury
Puncture wound may be puncture caused by sharpened electrode.
• Do not reach into the danger zone.
• Wear protective gloves.
1 Torch body
2 Gas nozzle
3 Tungsten electrode
4 Back cap
5 Collet
Fig. 1 Equipping the torch
Step 1 Steps 2-3 Step 4
1
5 3 4 2