Abicor Binzel RB 61GD, Руководство по эксплуатации

Страница: 16 / 44

EN - 6
4 Putting into operation MAG Welding torches
1
Insert gas diffuser
(3)
into torch neck
(4)
.
2 Screw tip adaptor (2) into torch neck (4) and contact tip (2) into tip
adaptor (2) .
3
Screw gas nozzle
(1)
onto torch neck
(4)
.
4.2 Mounting the wire guide liner
1 Lay down the cable assembly (8) straight.
2
Remove gas nozzle
(10)
, contact tip
(9)
, tip adaptor
(11)
and gas diffuser
(1)
from torch neck
(2)
.
3 Unscrew retaining sleeve (5) from central connector (6) .
4
Slide liner
(7)
through the wire conduit
(3)
up to the retaining nipple
(4)
.
5 Screw in retaining sleeve (5) by hand.
6
Cut off the excess length of the liner
(7)
flush with the torch neck
(2)
and
pull out the liner
(7)
.
7 Sharpen the spiral guide liner beginning to an angle of approx. 40° and
debur the cutting point.
8
Slide sharpened liner
(7)
through the wire conduit
(3)
up to the retaining
nipple
(4)
.
9 Screw in retaining sleeve (5) and tighten it.
NOTE
• New still unused liners have to be shortened to the actual length of the
cable assembly.
1
Gas diffuser
2
Torch neck
3
Wire conduit
4
Retaining nipple
5
Retaining sleeve
6
Central connector
7
Liner
8
Cable assembly
9
Contact tip
10
Gas nozzle
11
Tip adaptor
Fig. 2
Liner
40°
1 2
10
11
3 4
8
5
6 7 9