Abicor Binzel K10, Руководство по эксплуатации

Страница: 20 / 24

EN - 10
10 Disposal Gouging torch
9.1 Daily cleaning
1 Remove weld spatter and impurities from the gouging torch.
9.2 Daily maintenance
1 Check the gouging torch for damage and replace damaged parts.
2 Ensure that all screwings are tight and retighten them if not.
10 Disposal
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to for the entire duration of
maintenance, servicing, mounting, dismounting and repair work:
• Switch off the power source.
• Close off the compressed air supply.
• Disconnect all electrical connections.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and
damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• The specified maintenance intervals are guidance values and refer to
single-shift operation.
• Maintenance and cleaning work may only be carried out by qualified
personnel (in Germany see TRBS 1203).
• Always wear your personal protective clothing when performing
maintenance and cleaning work.
NOTICE
• Do not dispose of the device with household waste.
• For disposal, observe the local regulations, laws, provisions, standards
and guidelines.