Abicor Binzel FES-200 W3, Краткая инструкция

Страница: 37 / 92

FES-200 W3 6 Putting into operation
EN - 15
1
Connect the torch system
(2)
, hose and rubber connector to the fume extraction system.
2
Connect the current clamp
(4)
to the fume extraction system
(1)
and fasten it on the extraction hose
(3)
(cable assembly) of the torch system
(2)
. (Option)
3
Connect the dedusting system to the compressed air.
4
Plug in mains plug.
6.1 Transport and installation
Select a location that allows a short and straight extraction hose feed and prevents it from entering the
employee’s space of movement.
6.2 Current clamp
The current clamp allows you to switch on automatically the FES-200 when the welding process starts.
1
Fume extraction system
FES-200 W3
2 Torch system
3
Extraction hose (cable assembly)
4
Current clamp, 4 pole (deviating
figure possible)
Fig. 7
Putting into operation
1
2
3
4
NOTICE
• When fixing the current clamp
(4)
, make sure that the red point points to the torch system.
1 Manometer 2 Rotary switch (I-0-Auto) 3 Complete current clamp, 4 pole (deviating figure possible)
Fig. 8
Complete current clamp
1 2 3