EN - 8
5 Functional Description
ABITIG
®
WH
The tungsten electrodes are not included in the scope of delivery and must be
ordered separately. Order data and part numbers for the equipment parts and
wear parts can be found in the current
ABICOR BINZEL
spare parts and
wear parts lists. The contact for consulting and ordering can be found in the
Internet at
4.1 Transport
The components are carefully checked and packaged, however damage may
occur during shipping.
4.2 Storage
Physical storage conditions in a closed environment:
2.3 Technical Data on page EN-4
5 Functional Description
The TIG welding torch is part of a welding system. When supplied with
appropriate operating resources, they produce an arc for welding. In TIG
welding, a tungsten electrode and an inert gas are used. The molten pool and
the arc are protected by the inert gas from atmospheric interferences. The
electrode holder or gas diffuser is used to transmit current to the tungsten
electrode. The ignition of the arc depends on the type of power supply and will
therefore not be described any further. The cable assembly serves as supply
line and includes all connection elements.
Checking procedure
on receipt of goods
Make sure that the shipment is complete by referring to the delivery note!
In case of damage
Check the package and components for damage (visual inspection)!
In case of complaints
If the goods have been damaged during transport, contact the last carrier
immediately! Keep the packaging for possible checks by the carrier.
Packaging for
returning the goods
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Tab. 9
Transport
