![background image](http://html1.mh-extra.com/html/abicor-binzel/abitig-grip-series/abitig-grip-series_operating-instructions-manual_3434587016.webp)
EN - 6
4 Putting into operation
TIG welding torch
Equip the torch neck according to the following figure:
4.2 Shortening the tungsten electrode
The electrode type is set by EN ISO 6848. The maximum electrode length
depends on the torch type.
4.3 Connecting the cable assembly
1
Plug the hose assembly connection into the power source and secure it with
a connection nut.
2
Properly mount the connections for water supply/return, shielding gas and
control line plug.
1
Torch body
2
Gas nozzle
3
Tungsten electrodes
4
Back cap
5
Electrode holder
Fig. 1
Step 1-4
Step 1
Step 2-3
Step 4
1
5
3
4
2
NOTICE
• Instead of the electrode holder, you may also use a gas diffuser. Due to
its design, it will produce a laminar gas flow.
NOTICE
• The welding performance is affected by the selection of the tungsten
electrode and by wear. A smooth, groove-free sharpened end of the
tungsten electrode has a positive effect on the welding result.
Содержание ABITIG GRIP Series
