Specifications
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
USER MANUAL
FLASHLIGHTS IN THE WORLD
THE MOST TECHNICALLY ADVANCED
Warnings
Care and Storage
Service and Warranty
Specifications are subject to change without notice.
* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.
Model
Wizard Pro XHP50
Wizard Pro XP-L
LED / Optics
Cree XHP
50
/ TIR
Cree XP-L / TIR
Brightness stabilization type
FULL (constant light)
Light output, LED / OTF lumens*
2300 / 1800
1250 / 1000
Peak beam intensity, candelas
4200
3560
Hotspot / spill
70
°
/
1
2
0°
70
°
/
12
0°
Beam distance*
130
meters
119 meters
Modes and runtimes
(measured with 18650 Li-Ion
3
4
00mAh until the light output
drops to 10% of the initial
value)
Turbo2
1800 lm /
1
h
1000 lm / 1.3h
Turbo1
900 lm /
1
.
7
h
720 lm /
1
.8h
Main3
390 lm /
4
h
390 lm /
3
.5h
Main2
165 lm /
10
.
5
h
180 lm /
8
.5h
Main1
30 lm /
50
h
60 lm / 18h
Firefly3
5.5 lm /
40
d
7.5 lm / 6d
Firefly2
1.5 lm / 40d
2.3 lm / 18d
Firefly1
0.15 lm / 200d
0.4 lm / 100d
Strobe3
10Hz /
1800lm
/
2h
10Hz /
1000lm
/ 2
.7
h
Strobe2
1Hz /
1800lm
/
5h
1Hz /
1000lm
/ 6
.7
h
Strobe1
1Hz /
165lm
/
52h
1Hz /
180lm
/ 42h
Power source
1x18650 Li-Ion / 2x
18350
Li-ion /
2xRCR123 Li-ion / 2xCR123A
Size and weight (without batteries)
Length 101mm, body diameter 24.5mm, head diameter 29mm, weight 48g
Armytek Optoelectronics Inc.
Web: www.armytek.com Email:
Address:
13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada
Wizard
Armytek Optoelectronics Inc.
is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your
needs. The components made in the USA and Japan.
.
10 years no-hassle warranty
§
Superb light of amazing constant brightness due to powerful electronics and active temperature control without timers.
§
Multi-flashlight “10 in 1" is for many activities: car, fishing, hunting, home, work, city, picnic, bike, outdoor, travel.
§
Efficient TIR-optics and no “tunnel vision” effect even after continuous use.
§
Warning Indication of low battery level and real-time temperature control.
§
Side switch for comfortable one-hand operation and easy modes switching with advanced operation.
§
Multicolor State Indication and ultra low current drain in OFF-state more than 25 years.
–
§
Comfortable headband for reliable fixation of the flashlight – it won’t slip even while you’re running.
§
Solid body without long wires, weak rubber connectors and unnecessary boxes.
§
Removable magnet in the tailcap, removable clip, strong lanyard and possibility of tail-stand for multipurpose use.
§
Total protection from water, dirt and dust penetration – flashlight continues to work even at the depth of 10 meters.
We DO NOT RECOMMEND to use low-quality CR123A batteries, because they can explode. Turbo mode needs rechargeable
18650 Li-Ion batteries without PCB (unprotected) or with PCB which guarantees 7A discharge current for stable work.
Armytek provides free warranty repair for 10 years from the
date of
purchase.
Warranty doesn't cover damage caused by:
1.
Improper usage.
2.
Attempts to modify or repair the flashlight by nonqualified specialists.
3.
Longtime application in chlorinated or polluted water, or other liquids (other than water).
4.
High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).
5.
Usage of low-quality batteries.
1.
Always follow the instructions from this manual and recommendations on battery usage.
2.
Apply only the recommended power sources.
3.
Do not reverse battery polarity.
4.
Do not use different power sources together, i.e. old ones with new ones, charged with
discharged. Do not use different types of batteries combined as the element with less
capacity can be damaged.
5.
Do not modify or recast the flashlight and its components as it will deprive you of the
warranty.
6.
Do not allow water or any other liquid to leak into the flashlight.
7.
Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary
blindness.
8.
Do not allow children to use the flashlight without your assistance.
The producer will
not be liable for any harm done to the user if it was caused by
improper use of the product.
It is recommended to clean the threads and O-ring
s
off dirt and old grease
once or twice per year. Remember that
reliable
protection
from water and dust cannot be provided by worn out sealing.
The
fouling as well as lack of lubricant cause fast wear-out of threads and
sealing rings.
To clean the threads do the following:
1.
Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).
2.
Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged
replace it by a new one.
3.
Clean the metal threads with a brush using ethanol. Be careful not to allow
the
applied liquid to get inside the flashlight or tailcap as
it can cause fails in functionality of the flashlight.
After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of
automotive and other improper grease can cause swelling and damage of the sealing rings.
In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts
as often as required
.
The flashlight will get hot in Turbo mode quickly and discharge the battery by high current.
Don't leave it without your attention as very
bright light can heat objects and be a cause of the fire.
We DO NOT RECOMMEND to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable) can
leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in
then
use
new and
high-
quality batteries
and
store the flashlight in acceptable for batteries operational temperature and revise the batteries' state at least
once a month. If you have noticed any signs of batteries' defects
then
withdraw them from the flashlight and utilize. It is also recommended to
replace discharged batteries with new ones before the storage as the chance of leakage is higher with discharged batteries.
