Alignment jig
5 Functional description
EN - 7
5.1 Installing the alignment jig
1
Use M8 screws to attach the alignment jig to the bores
on a flat surface. (The 6 screws are not
included with the jig)
2
Mount the guide body
in line with the bending angle to be checked and the clamping body
the mounting plate
.
The device has been designed so that all bending angles of a torch series can be tested in one clamping
process using additionally screwed on guide bodies. For special torches, the alignment jig is customized.
NOTICE
• To allow the alignment jig to be screwed on without distortion, the installation surface must be flat and
should ideally be dry and free from dirt.
1
Clamping body
2
G350 gauging sleeve
3
Adjusting lever and fastener
4
Mounting plate
5
Complete guide body with inspection device
6
G350 setting sleeve
7
G500 gauging sleeve
8
G360 gauging sleeve
9
G360 adaptor
10
G500 adaptor
11
G360 setting sleeve
12
G500 setting sleeve
13
Bore
ø
9 (6x)
Fig. 1
Installing the alignment jig
1
2
3
4
5
8
7
6
13
12
11
10
9
Содержание ABIROB G360
