![background image](http://html1.mh-extra.com/html/abicor-binzel/abiplas-cut-200-w-mt/abiplas-cut-200-w-mt_operating-instructions-manual_3498153038.webp)
EN - 14
6 Putting into operation
ABIPLAS
®
CUT 200 W/MT
The choice of plasma nozzle is determined by the thickness of the material to
be cut and the current intensity.
Tab. 5 Selection of plasma nozzle on page EN-9
5
Screw on the protection cap hand tight.
6.1.1 Accessories
Torch carriage set
• The torch carriage makes it possible to cut circular parts in the diameter
range of approx. 100 to 1000 mm with the
ABIPLAS
®
CUT
200 W
manual torch.
• The torch carriage is clamped to the protection cap.
Torch carriage
• Without circular guide
Spacer
• Distance spring
• Bevel nozzle
• Hole piercing cap
NOTICE
• When tightening the set screw on the clamp, ensure that the protection
cap is not subject to excessive pressure, damaging the female thread.
Fig. 3
Torch carriage
ABIPLAS
®
CUT
200 W