Abicor Binzel ABIMIG SpinArc, Руководство по эксплуатации

Страница: 37 / 48

ABIMIG
®
SpinArc
®
9 Maintenance and cleaning
EN - 15
Refer to the maintenance schedule for checking, cleaning and replacing components. For assembly and
disassembly of the individual components, proceed as shown in the following diagram:
1 Use a wire brush to clean components to which weld spatter generally adheres and scour with
compressed air. Mount or replace.
2 Check all cables and plastic sheaths for damage and soiling and replace if necessary.
3 Check that all connections are secure.
4 ABICOR BINZEL offers factory repair services.
9.1 Replacing the contact tip

Fig. 8 Maintenance and cleaning on page EN-15
1 Hold the tip adaptor extension (7) with an 8 mm wrench.
2 Remove the contact tip (6) with a wrench. Check it and, if necessary, clean or replace it.
3 Re-attach the contact tip (6) .
1 Central connector
2 Cam
3 O-ring torch body
4 Cap
5 Gas nozzle
6 Contact tip
7 Tip adaptor extension
8 Outer flexure fastener
9 Inner flexure fastener
10 Flexure
11 Tip adaptor
12 Spin shaft
13 Power stud
Fig. 8 Maintenance and cleaning
1 2 3
4
5 6 7 8 9 10 12
13
11
NOTICE
• The flexure (10) may be damaged when you replace the contact tip.
• The contact tip (6) must be positioned securely.