EN - 5
ABIMIG
®
WT
4 Putting into operation
3.2 Emergency information
In case of emergency, immediately interrupt the power, compressed-air and
shielding gas supplies. Further measures can be found in the "Power supply"
operating instructions or in the documentation of further peripheral devices.
4 Putting into operation
4.1 Equipping the torch
Equip the torch neck according to the following figure:
1
Screw the replaceable tip adaptor to the torch neck
(refers to
ABIMIG
®
240D/401D/501D WT).
The following steps refer to all torch types.
2
Screw gas diffuser onto tip adapter.
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Switch off the power supply and cut off the gas supply.
• Close off the compressed-air supply and pull the main plug.
CAUTION
Risk of injury
Through-hole or puncture caused by electrode tip.
• Do not reach into the danger zone and wear protective gloves.
1
Gas nozzle
2
Contact tip
3
Gas diffuser
4
Tip adaptor
5
Torch neck
Fig. 1
Equipping the torch
ABIMIG
®
401/501 WT/240/401/501 D WT
1
2
3
4
5
ABIMIG
®
401/501 WT
ABIMIG
®
240/401/
501D WT
