Abicor Binzel ABICAR 1200 PRO, Инструкция по эксплуатации

Страница: 35 / 64

ABICAR 1200 PRO 2 Safety
EN - 5
2 Safety
This chapter provides you with basic safety instructions and warns you against residual hazards which must
be observed in order to operate the product safely. Non-observance of the safety instructions may result in
risks to the life or health of personnel and result in environmental damage or material damage.
2.1 Designated use
The device described in these instructions may be used only for the purpose and in the manner described in
these operating instructions. When doing so, observe the operating, maintenance and servicing conditions.
Unauthorised modifications or changes to enhance the performance are not permitted.
► Do not exceed the maximum load data specified in the documentation. Overloads lead to destruction.
► Do not make any constructive changes to the product.
► During welding work outdoors, use suitable protection against the weather conditions.
► Only use the welding torch types/dimensions specified in the technical data.
► Only weld workpieces and/or materials specified in the technical data.
► Do not use the device for TIG welding.
2.2 Responsibilities of the user
► Ensure that only qualified personnel perform work on the device or system.
Qualified personnel are:
— those who are familiar with the basic regulations on occupational safety and accident prevention;
— those who have been instructed on how to handle the device;
— those who have read and understood these operating instructions;
— those who have read and understood the safety instructions listed above;
— those who have been trained accordingly;
— those who are able to recognize possible risks because of their special training, knowledge, and
experience.
► Keep unauthorized persons out of the work area.
Country-specific responsibilities of the user
► Observe the local work safety regulations.
2.3 Warning and information signs
The following warning and information signs may be found on the product, depending on the model:
These markings must always be legible. They must not be covered, obscured, painted over or removed.
► Read and observe the operating instructions.
Warning against hand injuries.
► Wear protective gloves.