EQUIPMENT MUST BE GROUNDED
WARNING:
WARNING!
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN,grounding provides the
path of least resistance for an electric current and reduces the risk of electric shock.
This tool is equipped with an electric cord that has an equipment grounding
conductor and a grounding plug. The plug MUST be plugged into a matching outlet
that is properly installed and grounded in accordance with ALL local codes and
ordinances.
DO NOT MODIFY THE PLUG PROVIDED.If it will not fit the outlet, have the proper
outlet installed by a licensed electrician.
IMPROPER CONNECTION of the equipment grounding conductor can result in
electric shock. The conductor with the green insulation (with or without yellow
stripes) is the equipment grounding conductor. lf repair or replacement of the
electric cord or plug is necessary, DO NOT connect the equipment grounding
conductor to a live terminal.
CHECK with a licensed electrician or service personnel if you do not combletely
understand the grounding instructions or whether the tool is properly grounded.
This tool is for indoor use only. Do not expose to rain or use in
damp locations.
·
Make sure your extension cord is properly wired and in good condition.
·
Protect your extension cords from sharp objects, excessive heat, and damp/wet
areas.
·
Use a separate electrical circuit for your tools. This circuit must not be less than a
#12 wire and should be protected with a 15 A time-delayed fuse.
·
Before connecting the motor to the power line, make sure the switch is in the OFF
position and the electric current is rated the same as the current stamped on the
motor nameplate. Running at a lower voltage will damage the motor.
Please note that the dust remover can only be used with accessories approved by
Abestorm. Using unauthorized accessories or making changes to the machine may
void your warranty. Please contact us for details.
3
ELECTRICAL SAFETY
WARRANTY EXCLUSIONS
DAMAGE DUE TO THE FOLLOWING IS NOT covered under warranty.
