7
INSTALLATION METHOD #2 (Fig. 3):
Make sure the unit will be situated at least 7' above the floor and at least 3' away
from a corner and from any heating or air vents.
1.Use the M4 screws to install 4 mounting brackets on to the equipment.
3.On the marked spots, use a 10mm drill bit to make a hole for the insertion of the
expansion screws to the ceiling.
4.Carefully lift the equipment to insert the ceiling-attached expansion screw to the
hole of mounting brackets. Use the nut to secure the mounting backet and the
machine on the ceiling.
Fig. 3
NOTE:
The above installation must be installed by no less than two people!
For a step-by-step video tutorial, search the URL provided below using your
computer browser.
Guide starts at 1:12 of the video.
When you install the unit, you may also put the air outlet to up. (You need to remove
the control panel, and turn around 180°, then install back again.)
https://youtu.be/WWP18hy7ExE
2.Measure the distance between brackets and use it as a guide to create a marking
on the ceiling before for the installation. (recommended installation size: 18.9 ×
18.9 inch, 48 × 48 cm.)
