manualshive.com logo in svg

Aber Hot Tub Manufacturing Pacific 2004, Руководство пользователя

Поделиться
Скачать
Aber Hot Tub Manufacturing Pacific 2004 Скачать руководство пользователя страница 37

turns Pump 1 off. A built-in timer automatically turns Pump 1 off after 20 minutes, unless it has been
manually deactivated.
The “Pump 1” icon lights up when Pump 1 is on at high speed. It flashes when Pump 1 is on at low speed.

Starting Pump 2:

Press 

Pump 2

to turn Pump 2 on at low speed. Press a second time to turn Pump 2 to high speed. A third

time turns Pump 2 off. A built-in timer automatically turns Pump 2 off after 20 minutes, unless it has been
manually deactivated.
The “Pump 2” icon lights up when Pump 2 is on at high speed. It flashes when Pump 2 is on at low speed.

Economy mode start time & duration

The Economy mode allows you to lower the temperature Set Point of the spa by 20°F (11°C) during a certain
period of the day. When in Economy mode, the “Economy Mode” icon will be displayed.
To program the Economy mode, you must enter two parameters: the start time and the duration. If the
Economy mode is not required, the duration must be set to “OFF”.
You can manually override the current Economy status (on or off) for the rest of the day by pressing

Econo

key.

To set the start time of the Economy mode:

1. Enter the programming mode by pressing 

Program

key.

2. Select the Economy mode start parameter by pressing 

List

key until “ECon” is displayed.

3. Press 

Enter

key to display the current setting.

4. Use 

Up

or 

Down

arrow key to change setting.

5. Press 

Enter

key to confirm the new setting.

The spa side control will return to normal mode.

To set the duration of the Economy mode:

1. Enter the programming mode by pressing 

Program

key.

2. Select the Economy mode duration parameter by pressing 

List

key until “ECdu” is displayed.

3. Press 

Enter

key to display the current setting.

4. Use 

Up

or 

Down

arrow key to change setting.

5. Press 

Enter

key to confirm the new setting.

The spa side control will return to normal mode.

Time of day

This function allows you to set the internal clock of the system.
The unit will keep time in memory for about 48 hours in case of power failure.

To set the time:

1. Enter the programming mode by pressing 

Program

key. “CL” is displayed.

2. Press 

Enter

key to display the current setting.

3. Use 

Up

or 

Down

arrow key to change setting.

4. Press 

Enter

key to confirm the new setting.

The internal clock will be adjusted and the spa side control will return to normal mode.

38

PA C I F I C   H O T   T U B S   O W N E R ’ S   M A N U A L

Содержание Pacific 2004



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды