ABELL TH-308G VHF Service Manual
- 4 -
①
PTT(Push-To-Talk)switch
Press this switch, then speak into the microphone to call a station. Release the
switch to receive.
②
Monitor Key
Press and hold to monitor how busy the current channel is and to monitor signals
being received that don’t contain the matched QT/DQT code.
③
Channel announcer
Press this switch to get current channel information.
④
Channel selector
Rotate to select channels 1-16.
⑤
LED indicator
Lights red while transmitting, green while receiving a signal. Flashes red when the
battery voltage is low while transmitting.
⑥
Power switch/Volume control
Turn clockwise to switch the transceiver ON. Turn counterclockwise until a click
sound, to switch the transceiver OFF. Rotate to adjust the volume level.
PC MODE
Preface
The transceiver is programmed by using a personal computer, programming
interface (provided by ABELL) and programming software. Fig. 1 shows how the
devices work.
Connection procedure
1
.
Connect theTH-308G to the personal computer with the interface cable (UNX-05).
2
.
When data is transmitting from the transceiver the red LED lights.
When data is receiving by the transceiver the green LED lights.
Notes:
·
The data stored in the personal computer must match the Model Name when it is
written into the EEPROM. Run the software and connect the transceiver with the
personal computer, and then turn ON.
·DO NOT press the [PTT] key during data transmission or reception.
Содержание TH308G
