Abe CS8035, Руководство пользователя

Страница: 6 / 14

6
Ending Calls
While a call is in session on the Headset HS, pressing S1 will disconnect the call. After the call
is disconnected, the green LED will flash normally.
To reject a call (For Nokia 3650, Siemens S55, or equivalent models)
When the HS rings, press and hold S1 until you hear a long beep tone.
To make a new call
To make a call using voice dialing
1. Make sure the phone and the HS are on within the range of each other. Press S1.
2. After the beep tone, voice dial as you normally would. If using the Bluetooth phone adapter,
say the voice command after the phone beeps (not after the headset’s beep tone). To know when
the phone beeps in relation to the headset beep, you can make a test call using voice dialing.
Redialing last dialed number (For Nokia 3650, Siemens S55, or equivalent models)
To redial the last dialed number, press and hold S3 for 2 seconds. Short low tones will indicate
an attempt to redial.
Adjusting Speaker volume
While a call is in session, pressing and releasing S2 will increase the speaker volume and pressing
and releasing S3 will decrease the speaker volume on the HS. There is a key tone to indicate
volume increase or decrease. However, the key tone will stop when the volume
level reaches its maximum or minimum.