Abe CS8035, Руководство пользователя

Страница: 4 / 14

4
Putting Headset in Pairing Mode
While the HS is powered off, press and hold S1 for 4 seconds. Red and Green LEDs flashing
alternately will indicate the HS is in Pairing Mode.
Follow the operating instructions for your Bluetooth mobile phone to start the pairing process.
Typically, this has to be done by going to a setup or connect menu and then selecting the options
to discover Bluetooth devices. Bluetooth may take several seconds to establish a connection.
Your phone's display should indicate that it has found the“CS8035”headset and asks if you want to
pair it. You should confirm this. The phone's display would prompt you for a passkey or PIN.
Enter a sequence of “1234”.
The headset LED will flash Green every 3 seconds, indicating successful pairing. Usually the
phone will also ask whether you want to change the headset's name. We would recommend you
should approve the CS8035 name and not change it.
If pairing does not occur as expected. Turn the headset and phone off and wait for10 seconds.
Turn the headset and phone on again and repeat all steps from beginning.