ABC Design Tragewanne PLUS, Инструкция по эксплуатации

Страница: 7 / 32

EN - 04
1. Opening the carrycot
a. Open out the adapters.
b. Prepare the carrycot by pulling out the clamp fastenings on both sides until they click into place.
2. Fitting the apron
Fit the closed end of the apron over the lower end of the carrycot.
Extend the apron over the carrycot.
Secure the ends of the apron with the Velcro fastening provided on the outside of the hood.
3. Inserting the mattress
Insert the mattress in the cover.
Lay the mattress on the base.
NB: The mattress is wedge-shaped. Make sure that the raised part is at the head end.
4. Adjusting the handle
To adjust the handle, press the buttons on both sides.
Now you can adjust the handle.
5. Fitting the hood
a. Fit the hood over the handle. Close the zip fastener on both sides.
b. Connect the Velcro fasteners on the bottom of the hood to the ones on the carrycot.
6. Mounting the carrycot on the pushchair
The adapter is fitted to the long side of the carrycot.
Place the carrycot onto the pushchair so that the catch mechanism engages.
To remove the carrycot, press the buttons on the adapter on both sides of the cot and lift the cot up to
release it from the catches.
CAUTION: Always check before use that the carrycot is correctly secured to
the pushchair.
7. Folding away the carrycot
a. Pull the clamp fastenings on both sides inwards.
b. Fold in the adapters.