Abbott FreeStyle Navigator Скачать руководство пользователя страница 80

Страница: 80 / 196

Steps

Do This

Access the Alarms menu

from the Main menu.

Note:

If you don’t press any buttons within 12 seconds,

the receiver screen will go blank and the last change will

be lost if you haven’t pressed the Select button.

Press the UP Arrow button or the DOWN Arrow

button to highlight Alarms.

Press the RIGHT Option button (Select) to go to the

Alarms Setting screen.

Decide what to do.

Note:

In all the subsequent steps choosing the Next button will allow you to go from one field to

another. For example, you can go from the ON/OFF field to the Glucose threshold field to the

alarm setting field. Choosing the UP/DOWN Arrow button will allow you to choose the value you

want for the field.
For example, choose ON or OFF for the alarm, choose a number for the threshold like 70 mg/dL

or choose medium beep or long beep for the alarm setting.
Review the alarm performance data in Section 18 for a detailed analysis of the effectiveness of the

glucose alarms.

• Set, review or change the Low glucose alarm.

Go to Step 3.

• Set, review or change the High glucose alarm.

Go to Step 4.

• Set, review or change the PROJECTED Low glucose alarm.

Go to Step 5.

• Set, review or change the PROJECTED High glucose alarm.

Go to Step 6.

• Set, review or change the Data loss alarms.

Go to Step 7.

• Set, review or change the System alarms.

Go to Step 8.

• Set Progress tones.

Go to Step 9.

• Mute all audible alarms.

Go to Step 10.

If you want to

Then

Customer Care: 1-866-597-5520

Section 8

Set, Review, or Change the Alarm Settings

Main 08:30A
Glucose

Alarms

  Reports
  System
  Add Event

Select

Содержание FreeStyle Navigator





































































































































































































Результаты поиска

Содержание FreeStyle Navigator

Отзывы:

Похожие инструкции для FreeStyle Navigator

Бренды по названию

Популярные бренды

Abbott FreeStyle Navigator, Руководство пользователя

Результаты поиска

Содержание FreeStyle Navigator

Отзывы:

Похожие инструкции для FreeStyle Navigator

Бренды по названию

Популярные бренды