Abbott FreeStyle Navigator Скачать руководство пользователя страница 189

Страница: 189 / 196

OVER

20 Glossary

(con’t)

Reports

Information about your glucose levels shown in a way to help you and your healthcare team

analyze changes in your glucose levels and your treatment plan (such as changes in insulin doses,

carbohydrate intake, etc.) Several types of reports are available.

Sensor

The part of the system that you insert under your skin. Each inserted sensor is intended to remain

in place and provide a continuous glucose reading for up to 5 days.

Sensor Code

A number that you will find on the sensor delivery unit packaging. This code number must

be entered into the receiver after you insert a new sensor and before you complete the system

calibration.

Sensor Delivery

Unit

The sensor delivery unit is designed and packaged to enable safe insertion of the sensor into

your skin. The sensor delivery unit has 2 parts assembled and packaged together: the sensor

inserter with pre-installed sensor (which puts the tip of the sensor under your skin) and the

sensor support mount (which stays on your skin to hold the sensor in place and which attaches

the sensor to the transmitter).

Sensor Inserter

The sensor inserter is a cylindrical-shaped, plastic-cased device. A pre-cocked, coiled spring is

connected to a stainless steel needle, used to guide the sensor for insertion. With a single push of

the insertion button, the needle guides the sensor into the skin and is quickly withdrawn from

the skin. The Locking Pin is designed to avoid accidental discharge of the sensor inserter. Do not

remove the locking pin until the sensor support mount is adhered to the skin.

Sensor Insertion
Button

With a single push of the insertion button, the needle guides the sensor into the skin and is

quickly withdrawn from the skin.

Sensor Insertion
Site

The place on your body where you insert a sensor, on either the abdomen or the back of the

upper arm. Always change the sensor insertion site each time a new sensor is used. The sensor

should be inserted at least 1 inch from the previous site.

Sensor Locking
Pin

A pin on the sensor delivery unit that was designed to prevent accidental release of the sensor.

This pin must be removed before the sensor can be inserted.

Sensor Release
Tabs

Parts of the sensor delivery unit that release the sensor inserter from the sensor support mount.

Sensor Support
Mount

The sensor support mount is designed to stay on your skin to hold the sensor in place and attach

the sensor to the transmitter. The blue release tabs release the sensor inserter from the sensor

support mount after the sensor is inserted into the skin.

Sharps Container

A safe place for disposal of sensor inserters and lancets.

Single-day
Statistics

A type of statistical report that shows a summary of glucose results in relation to your glucose

targets over a one-day period.

Site Rotation

The practice of using a different location on the body each time you insert a new sensor. The new

Sensor should be inserted at least 1 inch from the previous site.

Skin Barriers

Products that can help prevent irritation or sensitivity problems at the sensor insertion site.

Section 20

179

Glossary

Содержание FreeStyle Navigator





































































































































































































Результаты поиска

Содержание FreeStyle Navigator

Отзывы:

Похожие инструкции для FreeStyle Navigator

Бренды по названию

Популярные бренды

Abbott FreeStyle Navigator, Руководство пользователя

Результаты поиска

Содержание FreeStyle Navigator

Отзывы:

Похожие инструкции для FreeStyle Navigator

Бренды по названию

Популярные бренды