Abbott FreeStyle Libre, Интерактивное руководство

Страница: 103 / 142

Product Overview Reader App Sensor Product Use More Information
Checking Glucose with a Test Strip
How to do it:
After reviewing your result, remove and discard
the used test strip according to local
regulations.
Blood glucose results are marked on the results
screen and in the Reader's Logbook with the
symbol.
0:00 / 0:32
Previous
|
Next
Important
Use only FreeStyle Precision Neo test strips. Other test strips may produce inaccurate results.
Read all the instructions in this section. Failure to follow instructions may cause incorrect blood
glucose results. Practice the testing procedures before using the Reader's built-in meter.
Read the test strip instructions for use before performing your first blood glucose test as they contain
important information. They also let you know how to store and handle the test strips and give you
information about sample types.
The Reader's built-in meter is not for use on people who are dehydrated, hypotensive, in shock, or for
individuals in hyperglycemic-hyperosmolar state, with or without ketosis.
The Reader's built-in meter is not for use on neonates, in critically-ill patients, or for diagnosis or
screening of diabetes.
Follow your health care professional's advice when testing blood glucose levels.
Observe caution when using around children. Small parts may constitute a choking hazard.
You should clean and disinfect the Reader once per week. The Reader should also be cleaned and
disinfected prior to being handled by any person providing testing assistance to the user. Refer to the
Maintenance and Disposal section of the Reader Kit User's manual for instructions.
The Reader is for use by a single person. It must not be used on more than one person including
other family members due to the risk of spreading infection. All parts of the Reader are considered
biohazardous and can potentially transmit infectious diseases, even after performing the cleaning and
disinfection procedure.
Use the Reader's built-in meter within the test strip operating temperature range or you will see Error
Message E-1.
Use a test strip immediately after removing from its foil packet.
Only use a test strip once.
Do not put urine on the test strip.
Do not use expired test strips as they may cause inaccurate results.
Do not use a wet, bent, scratched, or damaged test strip.
Do not use the test strip if the foil packet has a hole or is torn.
Results from the built-in meter are shown only in your Reader's Logbook and not in other history
options.
Refer to your lancing device instructions for use for how to use your lancing device.
After performing a blood glucose test, wash your hands with soap and water and thoroughly dry
them.
The built-in meter displays results from 20 - 500 mg/dL. Low or high blood glucose results can
indicate a potentially serious medical condition.