Abbott FreeStyle Libre, Интерактивное руководство

Страница: 100 / 142

Product Overview Reader App Sensor Product Use More Information
Checking Glucose with a Test Strip
How to do it:
Use your lancing device to obtain a blood drop and apply
blood to the white area at the end of the test strip. Refer to
your lancing device instructions for use if you need help using
your lancing device. If sounds are turned on, the Reader beeps
once to let you know you have applied enough blood.
You will see a butterfly on the screen while you wait for
your result. Do not remove the test strip while the
butterfly is on the screen. If sounds are turned on, the
Reader beeps once when your result is ready.
If the butterfly does not appear, you may not have
applied enough blood to the test strip. Apply a second
drop of blood to the test strip within 5 seconds of the
first drop. If the butterfly still does not appear or if more
than 5 seconds have passed, discard the test strip. Turn
off the Reader and repeat the steps in this section with a
new test strip.
Previous
|
Next
Note
E-3 means the blood drop is too small, or incorrect test
procedure, or there may be a problem with the test strip.
E-4 means the blood glucose level may be too high to be
read by the System or there may be a problem with the test
strip.
See Troubleshooting section of the Reader Kit User's
Manual for more information.