27
28
Using Your Meter Memory
Purpose
The purpose of this section is to review your stored test results and 7-, 14- and 30-day averages.
Viewing Blood Glucose Averages in Memory
Start with the meter off (no test strip inserted). Press
m
. Your 7-day average
appears (control solution, LO and HI readings
not
included).
Note: To exit meter memory at any time, press and hold
m
.
Example:
Memory Display
your average
n= number of results included in your average
•
Press
c
to scroll through 14- and 30-day averages and all stored test
results. The most recent result appears first.
•
Press
m
to scroll backward.
Viewing Test Results in Memory
Meter memory stores the last 400 test results with time and date. Press
c
to scroll through the
results. The most recent result appears first.
on the display indicates that you are viewing stored test results.
shows the average value of glucose readings from the last 7-, 14- or 30-days.
on the display indicates that the test result occurred when it was too hot or too cold
to use the meter and may
not
be accurate. This result is included in 7-, 14- and 30-day
averages.
a test result of under 1.1 mmol/L is included in memory as LO.
a test result of over 27.8 mmol/L is included in memory as HI.
indicates a control solution test result.
www.AbbottDiabetesCare.com
ART22315-101_rev-B.indd 27-28
9/11/14 12:07 PM