Setup Guide: CONNECT Universal Gateway With ID NOW
TM
(Direct-Connect)
Abbott Rapid Diagnostics Informatics, Inc. (ARDx Informatics)
D10036883 REV AA
Page 23 of 26
February 1, 2021
© 2021 Abbott. All rights reserved.
All trademarks referenced are trademarks of either the Abbott group of companies, or their respective owners.
Any photographs displayed are for illustrative purposes only.
Step Action
Illustration
27
Select
Test Connection.
A connectivity test will be performed by the device.
A
Pending
status message is displayed during the
test.
28
Verify Test Connection: Following the
Pending
status message, a
Success
status message will be
displayed.
If the test is not successful, check that:
Steps 17-26 were completed successfully,
Cables are connected correctly per
instructions earlier in this document,
The CONNECT Universal Gateway is
powered on.
29
Your configuration is now
COMPLETE
.
Port Number 3002
Port Number 3002
Содержание CONNECT
Страница 1: ......