Setup Guide: CONNECT Universal Gateway With ID NOW
TM
(Direct-Connect)
Abbott Rapid Diagnostics Informatics, Inc. (ARDx Informatics)
D10036883 REV AA
Page 14 of 26
February 1, 2021
© 2021 Abbott. All rights reserved.
All trademarks referenced are trademarks of either the Abbott group of companies, or their respective owners.
Any photographs displayed are for illustrative purposes only.
Step
Action
Illustration
27
Select
Test Connection.
A connectivity test will be performed by the device.
A
Pending
status message is displayed during the
test.
28
Verify Test Connection: Following the
Pending
status message, a
Success
status message will be
displayed.
If the test is not successful, check that:
Steps 17-26 were completed successfully,
Cables are connected correctly per
instructions earlier in this document,
The Universal Gateway is powered on.
29
Your configuration for the first ID NOW
TM
device is
now
COMPLETE
.
If attaching a second ID NOW
TM
device, continue to
Section 6
in this document.
Содержание CONNECT
Страница 1: ......