www.ABBALightingUSA.com
MAIN LINE
WN12
WN12
Attach the wires from the fixture(s) to the main
cable, For best results, we recommend using
WN12 waterproof wire nuts (which are sold
separately)
16.Remember to test the fixture after making any
adjustments to ensure it is functioning correctly
and that the lighting is set to your preferences. To
adjust the light temperature, simply locate the
button positioned at the rear of the fixture and
press it accordingly. This will allow you to choose
from a range of temperature options, including
3000K, 4000K, and 5000K. .
17.To securely mount the fixture, carefully align
the clips on the fixture with the corresponding
slots on the metal plate. Apply gentle pressure to
attach the fixture to the metal plate, ensuring a
snug fit.
18. Once the fixture(s) have been installed securely,
it's time to turn on the power and enjoy the
enhanced lighting experience! Locate the power
switch or breaker that controls the fixture(s) and
turn it on. Take a moment to observe the lighting
effect
Remember to regularly maintain and clean the
fixture(s) to ensure optimal performance and
longevity. Refer to the manufacturer's instructions
for specific details on how to care for your
particular fixture.
15.Test the connection: Gently tug on each wire
to ensure they are securely held by the wire nut.
14. Insert the aligned ends of the wires into the
wire nut, ensuring that they go all the way in. The
bare ends should be completely covered by the
wire nut. Twist the wire nut: Firmly twist the wire
nut clockwise onto the wires, ensuring a secure
connection. Continue twisting until the wire nut is
tight and snug. It is recommended to apply
electrical tape around the wire nuts and wires as
an extra layer of protection.
