![background image](http://html2.mh-extra.com/html/abba/cdps59/cdps59_installation-manual_5035309003.webp)
Do not instal within 10 feet of a pool, spa or fountain
CAUTION:
Fixture(s) must be installed in accordance with all local codes and ordinances.
INSTALLATION INSTRUCTION
To ensure optimal performance and safety, it is
important to use our fixtures ONLY with a low
voltage
landscape
transformer.
This
transformer reduces the voltage from 120V to
12V, making it safe and suitable for outdoor use.
When installing the fixture(s), please follow
these instructions carefully:
1.Before installation, please ensure that the
power is turned off for your safety.
2.Choose the desired location for the path light,
keeping in mind the intended lighting effect.
3.Insert the spike into the ground, ensuring it is
vertical and firm., apply enough force to ensure
it is firmly anchored. Make sure to leave an
ample amount of space around the spike to
allow for the connection of the wire to the main
line.
4.Attach the path light to the top of the ground
stake.
5.Gently but firmly push the spike into the
ground , making sure it is securely anchored.
6.To establish a dependable and enduring
electrical connection between fixture wires and
the main line in outdoor or underground
installations, it is essential to select a suitable
main cable connector designed for direct burial.
This connector should be chosen based on its
ability to withstand environmental conditions,
resist moisture and corrosion, and provide
robust insulation. By adhering to industry
standards and best practices, including proper
wire stripping and secure fastening techniques,
a reliable connection can be established,
ensuring optimal performance, safety, and
longevity of the system.
www.ABBALightingUSA.com
We recommend using
WN12
waterproof wire
nuts (sold separately) for optimal connectivity.
7.Strip
the
insulation:
Carefully
strip
approximately 3/4 inch (1.9 cm) of insulation
from the ends of the two wires you wish to
connect. Ensure that the bare metal ends are
clean and free from any frayed strands.
8. Align the wires: Hold the stripped ends of the
two wires together, aligning them neatly and
ensuring that no stray strands are crossing over.
9.Insert the aligned ends of the wires into the
wire nut, ensuring that they go all the way in.
The bare ends should be completely covered by
the wire nut. Twist the wire nut: Firmly twist the
wire nut clockwise onto the wires, ensuring a
secure connection. Continue twisting until the
wire nut is tight and snug. Test the connection:
Gently tug on each wire to ensure they are
securely held by the wire nut. For added safety,
it is recommended to apply electrical tape
around the wire nuts and wires as an extra layer
of protection.
10.Remember to test the fixture after making
any adjustments to ensure it is functioning
correctly and that the lighting is set to your
preferences.
Once the fixture(s) have been installed securely,
it's time to turn on the power and enjoy the
enhanced lighting experience! Locate the power
switch or breaker that controls the fixture(s)
and turn it on.
Take a moment to observe the lighting effect
Remember to regularly maintain and clean the
fixture(s) to ensure optimal performance and
longevity. Refer to the manufacturer's
instructions for specific details on how to care
for your particular fixture.
.