Do not instal within 10 feet of a pool, spa or fountain
CAUTION:
Fixture(s) must be installed in accordance with all local codes and ordinances.
INSTALLATION INSTRUCTION
To ensure optimal performance and safety, it is important to
use our fixtures ONLY with a low voltage landscape
transformer. This transformer reduces the voltage from 120V
to 12V, making it safe and suitable for outdoor use.
When installing the fixture(s), please follow these instructions
carefully:
1.Prior to installation, it is imperative to verify that the
power is deactivated to guarantee your safety.
2. Remove the screws on the fixture using an Allen wrench.
3. Securely attach the ground spike with the metal plate
using the screw.
4. Securely fasten the ground spike with the metal plate to
the fixture by utilizing the screws, and then proceed to
tighten it using an Allen wrench.
4. To establish a dependable and enduring electrical
connection between fixture wires and the main line in
outdoor or underground installations, it is essential to select
a suitable main cable connector designed for direct burial.
This connector should be chosen based on its ability to
withstand environmental conditions, resist moisture and
corrosion, and provide robust insulation. By adhering to
industry standards and best practices, including proper wire
stripping and secure fastening techniques, a reliable
connection can be established, ensuring optimal
performance, safety, and longevity of the system.
We recommend using
WN12
waterproof wire nuts (sold
separately) for optimal connectivity.
5. Strip the insulation: Carefully strip approximately 3/4 inch
(1.9 cm) of insulation from the ends of the two wires you wish
to connect. Ensure that the bare metal ends are clean and
free from any frayed strands.
6. Align the wires: Hold the stripped ends of the two wires
together, aligning them neatly and ensuring that no stray
strands are crossing over.
www.ABBALightingUSA.com
