www.ABBALightingUSA.com
Insert the wires: Insert the aligned ends of the wires
into the wire nut, ensuring that they go all the way in.
The bare ends should be completely covered by the
wire nut. Twist the wire nut: Firmly twist the wire nut
clockwise onto the wires, ensuring a secure
connection. Continue twisting until the wire nut is
tight and snug. Test the connection: Gently tug on
each wire to ensure they are securely held by the
wire nut. The connection should be firm and not
come loose. Inspect the connection: Examine the
wire nut connection to ensure there are no exposed
wires or loose strands. If any issues are detected,
remove the wire nut and repeat the process from
step 5.
Note: It's always recommended to follow local
electrical codes and regulations when performing any
electrical work. If you're uncertain or uncomfortable
with electrical tasks, it's advisable to consult a
qualified electrician. Safety should always be a top
priority when working with electrical connections.
7. For a secure and stable mounting, dig a small hole
and insert the spike into the ground, ensuring it is
vertical and firm.
8.Once the fixture(s) are securely installed, turn on
the power and enjoy the enhanced lighting
experience!
We strongly recommend that the main cable from the
transformer be buried underground for safety
reasons. Additionally, please be sure to avoid
exceeding the maximum wattage on the fixture(s) to
prevent any damage or hazards.
WN12
(Sold separately)
Main Line
Connect the wires using
