ABB Welcome 5101 P Series, Руководство пользователя

Страница: 42 / 74

ABB Welcome
®
— 42 —
5.5 Keypad outdoor station
5.5.1 Call a resident (three types)
1. Physical address
The physical address is the internal code that the
outdoor station will send through the bus connection to
indoor stations or other devices in the system. For each
apartment, the physical address means the address of
an indoor station that is installed in the apartment. For
each building, the physical address means the address
of a gateway that is installed for each building. It is also
called the building number.
In standby mode, a visitor can press the physical
address corresponding to the residence (from 001 to
250).
For a complex building, a visitor needs to press the
building number (01- 60) plus the physical address (001
- 250), or make a call in the gate station.
2. Logical address
The logical address is a code that a visitor can press to make a call. The code must be assigned first and then associated with the physical
address.
Apartment numbers, which are easy for users to remember, are typically set as the logical addresses, but other special codes can also be
used.
Set the logical address by following these steps:
Assign the logical address:
#* system password #
=> system setting =>
Contact => Add => Logic Add.
Enter Physical
Add.:
01 001