60
VA Master FAM540
METAL CONE VARIABLE AREA FLOWMETER | OI/FAM540-EN REV. E
… 12 Repair
… Replacing the analog indicator
Installation / disassembly of the analog indicator
1
Hexagonal screws
2
Mounting bracket
Figure 28: Installation / disassembly of the analog indicator
The analog indicator is fastened to the mounting bracket with
two hexagon socket screws.
To facilitate the use of an analog indicator that is compatible
with the meter tube, the bracket has a plate bearing the serial
number.
The analog indicator is centered using 2 metal bushings that are
permanently bonded to the indicator and must not be moved.
Dismounting
1. Detach hexagon socket screws.
2.
Remove analog indicator.
Assembly
1.
Set the analog indicator, paying attention to the proper
centering of the metal bushings.
2.
Tighten hexagon socket screws.
Returning devices
Use the original packaging or a secure transport container of an
appropriate type if you need to return the device for repair or
recalibration purposes.
Fill out the return form (see
…
16 Appendix
Return form on page 64) and include this with the device.
In accordance with the EU Directive governing hazardous
materials, the owner of hazardous waste is responsible for its
disposal or must observe the following regulations for shipping
purposes:
All devices delivered to ABB must be free from any hazardous
materials (acids, alkalis, solvents, etc.).
Address for returns:
Please contact Customer Center Service according to page 6 for
nearest service location.
